Extra 330LX – 78″ (1.98m)

Pilot-Rc Extra’s are known for flying great, regardless of the version.  This new almost entirely carbon reinforced version takes the design further than ever before.  Strong, light and more rigid than ever before, this alone makes this plane a winner, but add the design tweaks and it becomes a showstopper!

Specifications:

Model:Extra 330Lx – 25%
Wingspan:78″ (1,980mm)
Length:74″ (1,833mm)
Wing area:1,131 “² (7,296 cm²)
Weight:12.98lbs (5.9kg)

Video and GALLERY:

 FEATURES:

  • NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.  
  • NEW! Patented quick assembly system for wings, stabilizer and SFG
  • NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
  • Genuine German Oracover (Ultracote) covering
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Internally mounted cowling – so no visible external screws exposed (two exposed screws underneath for easy mounting)
  • Removable wings and stabs
  • Laser engraved motor mounting position
  • Easy canister installation due to open construction
  • Pull pull system for Rudder servo
  • Cowl fits both gasoline (single cylinder and twin cylinder) and electric motors

*Due to hybrid construction, this kit does not offer Free replacement wood

Included hardware:

  • Complete air frame with all basic accessories (such as carbon fibre main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axels and wheel pants
  • Pre-prepared pushrods with ball links
  • Matching carbon spinner

REQUIRED HARDWARE:

Motor: 30-40cc or equivalent electric

Servos: 5 high torque (minimum 20kg) plus throttle // Uses x1 per aileron, x1 per elevator and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

PILOT-RC RECOMMENDED HARDWARE:

  • Servos: Pilot-Rc PW20AH (20Kg – 0,14s at 8,4v)
  • Servo arms: Pilot-Rc 1,6″ Aluminium arms (included with Pilot-Rc servos)
  • Wingbags: Pilot-RC wingbags

Colour schemes available:

Colour scheme LX-01: 
References: Oracover 21-010, 21-022, 21-033, 21-091, 21-071 / Ultracote HANU870, HANU883, HANU872, HANU881, HANU874


Colour scheme LX-09: 
References: Oracover 21-043, 21-071, 21-010 / Ultracote HANU903, HANU874, HANU870


Colour scheme LX-10: 
References: Oracover 21-023, 21-033, 21-071 / Ultracote HANU866, HANU872, HANU874


COLOUR SCHEMES AVAILABLE UNDER SPECIAL REQUEST:

Colour scheme LX-02: 
References: Oracover 21-010, 21-050, 21-033, 21-091, 21-071 / Ultracote HANU870, HANU873, HANU872, HANU881, HANU874


Colour scheme LX-07: 
References: Oracover 21-023, 21-071, 21-010 / Ultracote HANU866, HANU874, HANU870


Colour scheme LX-08: 
References: Oracover 21-050, 21-071, 21-010 / Ultracote HANU873, HANU874, HANU870


 

Build manual:

Center of Gravity: 141mm back from front leading edge on the root of the wing


HELPFUL MEASUREMENTS:

Including exhaust tunnel size, rudder servo location, landing gear measurements, cowl size, etc, please check out our Manuals page:


MORE PHOTOS & VIDEOS:

More photos available on the Pilot-RC facebook: www.facebook.com/pilotrcmodel